LAL02NA2R2K [TAIYO YUDEN]
General Purpose Inductor, 2.2uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT;
| 型号： | LAL02NA2R2K |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | General Purpose Inductor, 2.2uH, 10%, 1 Element, Ferrite-Core, AXIAL LEADED, ROHS COMPLIANT |
| 文件： | 总16页 (文件大小：332K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
AXIAL LEADED INDUCTORS
WAVE
■ FEATURES
■ APPLICATIONS
◦Extremely reliable inductors that are ideal for automatic insertion.
◦Use for TVs, DVD, audio equipment, communication instrument,
tuner, and general electrical instrument.
◦Highly efficient automated production processes can provide high
quality inductors in large volumes.
◦For DC/DC converter (LCD TV, PDP TV, CTV, DVD etc（.) CAL45 Series）
◦Wide selection of configurations including axial leaded, formed radial leads
and bulk products to meet most manufacturing needs.
■ OPERATING TEMP.
◦CAL45 is high current type, and has superior DC bias characteristics.
■ ORDERING CODE
◦ー25℃～105℃（Including self-generated heat）
L A L △ 0 2 T B R 2 2 K ○ ○ ○ ○ ○
❶
❷
❸
❹
❺
❻
❼
❶Type
Axial leaded
inductor
❸Dimensions
❹Lead configurations
KR Formed lead/bulk
❺Nominal inductance
〔μH〕
example
❻Inductance tolerance
（L×D）〔mm〕max
02 3.4×2.3（LAL/LAP）
3.6×2.4（LAN）
〔％〕
LA
J
±5
NA Axial lead/bulk
1R5
120
1.5
12
High current
CA axial leaded
inductor
K
±10
Axial lead (26mm lead space)
/ammo pack
TA
TB
45
8.0×4.4（CA）
❼Internal code
△△△△△ Standard product
△＝Blank space
※R=decimal point
Axial lead (52mm lead space)
/ammo pack
❷Product Specification
L△
N△
Standard type
High current type
Standard type
VD Formed lead/ammo pack
VB Formed lead/ammo pac（k CAL45）
P△
（Lead diameter：0.45φmm）
△＝Blank space
■ EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimensions［mm（］inch）
Taped
Bulk
Standard Quantity (pcs)
Lead Configuration Code
Type
L
φD
φd
Straight
Formed
VD
Straight
Formed
TA
TB
VD
NA
KR
TB
NA
3.4max.
2.3max.
0.5±0.05
LAL02
———
2,000
500
ー
（0.134max.） （0.091max.） （0.018±0.002）
Pitch：5mm（0.197）
KR
TA
3.4max.
（0.134max.） （0.091max.）
2.3max.
LAP02
LAN02
0.45±0.05
（0.018±0.002）
———
———
2,000
ー
2,000
3.6max.
（0.142max.） （0.094max.）
2.4max.
Pitch：5mm（0.197）
Unit：mm（inch）
Standard Quantity (pcs)
【CA type】
Dimensions［mm（］inch）
φD
Taped
Type
Fig.
L
φd
Straight
Formed
Bulk
Taped
Axial lead
2000
1500
VB
TB
8.0max
（0.315max）
4.4max
0.65±0.05
CAL45
—
（0.173max） （0.026±0.002）
Formed lead
5.0mm（0.197）
Unit：mm（inch）
■ AVAILABLE INDUCTANCE RANGE
Type
LAL/LAP02
Range
Type
LAN02
Range
CAL45
0.1μ
Rdc
max[Ω]
Imax[A]
Imax[A]
Rdc max[Ω] Imax[A]
Rdc max[Ω]
0.1
1
0.12
0.22
0.036 1.0μ
3.3
1.0μ
10μ
270
0.8
2.5
12
500
280
120
0.32
1.0
0.14
1.2
1.7
0.59
0.17
160
44
100μ
1.0m
10m
10
13.2
5.6
100
1000
10m
220
470
100m
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_e-01
106
■ PART NUMBERS
●LAL/LAP02
EHS (Environmental
Measuring
frequency
[MHz]
Selfーresonant
frequency
[MHz] (min.)
Inductance
[μH]
Inductance
Tolerance
Q
(min.)
DC Resistance
[Ω] (max.)
Rated current
[mA] (max.)
Ordering code
Hazardous
Substances
)
LA□ 02 ○ R22K
LA□ 02 ○ R27K
LA□ 02 ○ R33K
LA□ 02 ○ R39K
LA□ 02 ○ R47K
LA□ 02 ○ R56K
LA□ 02 ○ R68K
LA□ 02 ○ R82K
LA□ 02 ○ 1R0K
LA□ 02 ○ 1R2K
LA□ 02 ○ 1R5K
LA□ 02 ○ 1R8K
LA□ 02 ○ 2R2K
LA□ 02 ○ 2R7K
LA□ 02 ○ 3R3K
LA□ 02 ○ 3R9K
LA□ 02 ○ 4R7K
LA□ 02 ○ 5R6K
LA□ 02 ○ 6R8K
LA□ 02 ○ 8R2K
LA□ 02 ○ 100K
LA□ 02 ○ 120K
LA□ 02 ○ 150K
LA□ 02 ○ 180K
LA□ 02 ○ 220K
LA□ 02 ○ 270K
LA□ 02 ○ 330K
LA□ 02 ○ 390K
LA□ 02 ○ 470K
LA□ 02 ○ 560K
LA□ 02 ○ 680K
LA□ 02 ○ 820K
LA□ 02 ○ 101K
LA□ 02 ○ 121K
LA□ 02 ○ 151K
LA□ 02 ○ 181K
LA□ 02 ○ 221K
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
450
410
360
300
230
210
190
170
150
110
80
0.40
0.43
0.48
0.51
0.56
0.61
0.67
0.74
0.80
0.9
1.0
1.1
400
380
370
350
330
320
310
290
270
260
250
240
230
220
210
200
190
180
175
165
160
150
145
140
130
80
35
25.2
60
45
1.2
1.3
1.4
1.6
1.7
40
38
7.96
35
32
30
1.9
2.0
2.2
2.5
2.5
2.8
3.1
±10％
28
26
／
24
40
12
22
15
20
18
18
22
17
3.4
4.3
4.7
5.2
5.8
6.4
7.2
27
16
33
14
76
2.52
39
13
74
47
12
70
56
11
68
68
10
64
82
9.5
9.0
8.0
6.0
5.5
5.0
11
46
100
120
150
180
220
12
44
13
42
16
39
40
0.796
18
37
20
35
□ Please specify the Product Specification（Lead）code（. L:standard 0.5mm or P:0.45mm）
○ Please specify the Lead configuration code.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_e-01
107
■ PART NUMBERS
●LAN02
EHS (Environmental
Measuring
frequency
[MHz]
Selfーresonant
frequency
[MHz] (min.)
Inductance
[μH]
Inductance
Tolerance
Q
(min.)
DC Resistance
[Ω] (max.)
Rated current
[mA] (max.)
Ordering code
Hazardous
Substances
)
LAN02 ○ R12K
LAN02 ○ R15K
LAN02 ○ R18K
LAN02 ○ R22K
LAN02 ○ R27K
LAN02 ○ R33K
LAN02 ○ R39K
LAN02 ○ R47K
LAN02 ○ R56K
LAN02 ○ R68K
LAN02 ○ R82K
LAN02 ○ 1R0J
LAN02 ○ 1R2J
LAN02 ○ 1R5J
LAN02 ○ 1R8J
LAN02 ○ 2R2J
LAN02 ○ 2R7J
LAN02 ○ 3R3J
LAN02 ○ 3R9J
LAN02 ○ 4R7J
LAN02 ○ 5R6J
LAN02 ○ 6R8J
LAN02 ○ 8R2J
LAN02 ○ 100J
LAN02 ○ 120J
LAN02 ○ 150J
LAN02 ○ 180J
LAN02 ○ 220J
LAN02 ○ 270J
LAN02 ○ 330J
LAN02 ○ 390J
LAN02 ○ 470J
LAN02 ○ 560J
LAN02 ○ 680J
LAN02 ○ 820J
LAN02 ○ 101J
LAN02 ○ 121J
LAN02 ○ 151J
LAN02 ○ 181J
LAN02 ○ 221J
LAN02 ○ 271J
LAN02 ○ 331J
LAN02 ○ 391J
LAN02 ○ 471J
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
500
500
500
500
500
480
430
380
350
310
270
240
210
190
140
90
0.12
0.14
0.15
0.16
0.18
0.19
0.21
0.23
0.25
0.27
0.29
0.32
0.35
0.38
0.42
0.47
0.52
0.57
0.63
0.69
0.75
0.84
0.92
1.0
850
800
760
730
690
660
640
610
580
550
520
500
480
450
430
410
390
370
360
340
320
310
290
280
280
265
250
235
220
180
170
160
140
130
125
120
90
±10％
25.2
50
1.2
1.5
1.8
2.2
2.7
70
3.3
3.9
4.7
5.6
6.8
8.2
10
50
7.96
35
32
30
28
26
40
24
12
22
1.0
15
20
1.2
18
18
1.3
22
±5％
17
1.5
27
15
1.7
33
14
2.2
2.52
39
13
2.4
47
12
2.8
56
10
4.1
68
9.2
8.8
8.0
6.6
5.8
5.4
4.8
3.6
3.4
3.2
3.0
4.5
82
5.0
100
120
150
180
220
270
330
390
470
5.6
50
9.2
10.5
11.5
13
85
80
75
0.796
16
70
18
66
20
63
22
60
○ Please specify the Lead configuration code.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_e-01
108
■ PART NUMBERS
●CAL45
Rated current ※）
Self-resonant
frequency
[MHz]
EHS (Environmental
Measuring
frequency
[MHz]
DC Resistance
[Ω]
(max.)
[mA] (max.)
Inductance
[μH]
Inductance
Tolerance
Q
Ordering code
Hazardous
Substances
(refarence)
Saturation current
Temperature rise current
Idc2
)
(refarence)
Idc1
5600
5000
4400
4100
3900
3500
3100
3000
2800
2500
2200
2000
1700
1600
1400
1250
1200
1100
1000
920
890
790
700
620
590
550
490
420
370
CAL 45 ○ 1R0K
CAL 45 ○ 1R2K
CAL 45 ○ 1R5K
CAL 45 ○ 1R8K
CAL 45 ○ 2R2K
CAL 45 ○ 2R7K
CAL 45 ○ 3R3K
CAL 45 ○ 3R9K
CAL 45 ○ 4R7K
CAL 45 ○ 5R6K
CAL 45 ○ 6R8K
CAL 45 ○ 8R2K
CAL 45 ○ 100K
CAL 45 ○ 120K
CAL 45 ○ 150K
CAL 45 ○ 180K
CAL 45 ○ 220K
CAL 45 ○ 270K
CAL 45 ○ 330K
CAL 45 ○ 390K
CAL 45 ○ 470K
CAL 45 ○ 560K
CAL 45 ○ 680K
CAL 45 ○ 820K
CAL 45 ○ 101K
CAL 45 ○ 121K
CAL 45 ○ 151K
CAL 45 ○ 181K
CAL 45 ○ 221K
CAL 45 ○ 271K
CAL 45 ○ 331K
CAL 45 ○ 391K
CAL 45 ○ 471K
CAL 45 ○ 561K
CAL 45 ○ 681K
CAL 45 ○ 821K
CAL 45 ○ 102K
CAL 45 ○ 122K
CAL 45 ○ 152K
CAL 45 ○ 182K
CAL 45 ○ 222K
CAL 45 ○ 272K
CAL 45 ○ 332K
CAL 45 ○ 392K
CAL 45 ○ 472K
CAL 45 ○ 562K
CAL 45 ○ 682K
CAL 45 ○ 822K
CAL 45 ○ 103K
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.2
350
300
300
200
200
70
70
40
40
35
35
30
25
25
25
20
20
17
15
13
13
11
10
9
0.036
0.039
0.041
0.048
0.054
0.058
0.066
0.072
0.079
0.089
0.097
0.110
0.14
0.17
0.19
0.24
0.28
0.33
0.37
0.47
0.52
0.75
0.78
0.92
1.2
3300
3200
3000
2800
2700
2500
2400
2300
2200
2100
2000
1900
1800
1450
1430
1300
1220
1130
1080
900
870
710
1.5
1.8
2.2
2.7
30
7.96
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
40
30
18
22
27
2.52
33
／
39
47
56
68
700
640
630
490
470
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
±10%
40
50
9
7
1.6
7
1.8
60
80
5
2.3
450
425
355
330
280
240
240
220
210
5
2.9
5
3.4
350
320
290
270
0.796
70
80
4.5
4
3.6
4.9
4
6.3
3
7.0
250
240
3
7.8
2.5
2.5
2
11.0
13.2
17
220
190
170
170
150
140
2
22
150
1.5
1.5
1.2
1.2
1
27
140
120
36
130
110
45
110
90
0.252
65
100
95
75
69
70
70
30
1
80
90
65
1
90
90
60
1
100
125
155
80
60
0.7
0.6
75
50
0.0796
65
45
○ Please specify the Lead configuration code.
※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 10%. (at 20℃)
※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)
※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_e-01
109
■ ELECTRICAL CHARACTERISTICS
DC Bias characteristics
■
（Measured by HP4285A）
CAL45
LAL/LAP02
100000
10000
1000
CAL45TB103K
CAL45TB102K
100
10
CAL45TB101K
CAL45TB100K
1
CAL45TB1R0K
0.1
0.01
0.1
1
10
Temperature characteristics
■
（Measured by HP4285A）
LAL/LAP02
LAN02
LAN02TA100J
LAN02TA101J
Q-Characteristics
■
（Measured by HP4285A+HP42851A）
LAL/LAP02
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_e-01
110
／
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_e-01
111
■ PACKAGING
①Minimum Quantity
◦Taping for Straight Leads
◦TB（a：52mm lead space）
（2.05 inches）
Type
Lead Configuration code
Standard quantity (pcs.)
LAL02
LAP02
LAN02
CAL45
TB
TA
TA
TB
2,000
2,000
2,000
2,000
◦Taping for Formed Leads
Type
Lead Configuration code
Standard quantity (pcs.)
LAL02
CAL45
VD
VB
2,000
1,500
◦Bulk
L
1
Type
Lead Configuration code
Standard quantity (pcs.)
LAL02
LAP02
LAN02
NA
KR
KR
500
Dimensions
Minimum
insertion
pitch
2,000
2,000
Type
φD
L
a
b
|L1-L2|
φd
＋2
－1
52
2.3max
（0.091max）（0.134max）
3.4max
1.2max
1.0max
0.5±0.05
5.0
②Dimension
◦NA
LAL02
＋0.079
（0.047max）（0.039max）（0.020±0.002）（0.197）
（2.05－0.039
）
Unit：mm（inch）
◦VD
Dimensions
Minimum
insertion pitch
Type
φD
2.3max
L
φd
ℓ
3.4max
0.50±0.05
24±2.0
5.0
LAL02
（0.091max）（0.134max）（0.020±0.002）（0.945±0.079） （0.197）
Unit：mm（inch）
◦KR
1
Type
Symbol
A
Dimensions
Symbol
W
Dimensions
Dimensions
Lead configuration
code
＋1.0
18.0
Type
3.9max
（0.154max）
－0.5
φD
F1
φd
b
＋0.039
（0.709
）
－0.020
2.3max
5.0±0.5
0.45±0.05
7.0±1.0
LAP02
KR
KR
2.3max
（0.091max）
12.5 min.
（0.492 min.）
（0.091max）（0.197±0.020）（0.018±0.002）（0.276±0.039）
φD
H
W0
W1
W2
ℓ
2.4max
5.0±0.5
0.45±0.05
7.0±1.0
＋0.75
LAN02
9.0
19.5±0.5
（0.768±0.020）
－0.5
（0.094max）（0.197±0.020）（0.018±0.002）（0.276±0.039）
＋0.030
（0.354
）
－0.020
Unit：mm（inch）
12.7±1.0
（0.500±0.039）
3.0 max.
（0.118 max.）
P
◦TA（a：26mm lead space）
（1.02 inch）
12.7±0.3
（0.500±0.012）
2.0 max.
（0.079 max.）
P0
P1
P2
F
LAL02
3.85±0.7
（0.152±0.028）
4.0±0.3
（0.157±0.012）
φD0
6.35±0.5
（0.250±0.020）
5.08±0.5
（0.200±0.020）
0.50±0.05
（0.020±0.002）
φd
0±1.0
（0±0.039）
11.0 max.
（0.433 max.）
△h
ー
L
t
0.5±0.2
（0.020±0.008）
ー
L
1
Unit：mm（inch）
Dimensions
Minimum
insertion
pitch
Type
φD
L
a
b
|L1-L2|
φd
＋0.5
－0
26
2.3max
（0.091max）（0.134max）
3.4max
0.8max
0.5max 0.45±0.05
5.0
LAP02
LAN02
＋0.020
（0.031max）（0.020max）（0.018±0.002）（0.197）
（1.02－0
）
＋0.5
26
2.4max
（0.094max）（0.142max）
3.6max
0.8max 0.5max 0.45±0.05
（0.031max）（0.020max）（0.018±0.002）（0.197）
）
5.0
－0
＋0.020
（1.02－0
Unit：mm（inch）
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_pack_e-01
leaded_i01_pack-P1
■ PACKAGING
◦CAL 45 TB（a：52mm lead space）
（2.05 inches）
Dimensions
Minimum
insertion
pitch
Type
φD
L
a
b
|L1-L2|
φd
＋2
52
4.4max 8.0max
1.2max 1.0max
） （0.047max） （0.039max） （0.026±0.002）
0.65±0.05
10.0
（0.394）
ー1
CAL45
＋0.079
ー0.039
（0.173max） （0.315max） （2.05
Unit：mm（inch）
◦CAL 45VB
F
Type
Symbol
D
Dimensions
Symbol
W
Dimensions
＋1.0
18.0
ー0.5
φ4.4max
＋0.039
（
）
0.709ー0.020
14.0max
（0.551max）
12.5min
H2
H0
P
W0
W1
W2
ℓ
D0
φd
L
（0.492min）
＋0.75
9.0
16.0±1.0
（0.630±0.039）
ー0.5
＋0.030
（
）
0.354ー0.020
※2
12.7±1.0
（0.500±0.039）
3.0max
（0.118max）
※1
2.0max
（0.079max）
12.7±0.3
CAL 45
P0
P1
P2
F
（0.500±0.012）
3.85±0.7
（0.152±0.028）
φ4.0±0.2
（φ0.157±0.008）
6.35±1.3
（0.250±0.051）
φ0.65±0.05
（φ0.026±0.002）
5.0±1.0
（0.197±0.039）
11.0max
（0.433max）
0.0±2.0
（0.0±0.079）
0.9max
（0.035max）
t
△h
Unit：mm（inch）
※1 Accumulated error for 20 pitches is ± 1mm.
※2 Bonding tape must not protrude from the base tape.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
leaded_i01_pack_e-01
leaded_i01_pack-P2
■ RELIABILITY DATA
1. Operating temperature Range
LA Type
CAL45 Type
ー25～＋105℃
LHL□□□
FBA/FBR
ー25～＋85℃
ー25～＋105℃
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA・CA・FL : Including self-generated heat
LHL□□□ : Including self-generated heat
2. Storage temperature Range
LA Type
CAL45 Type
LHL□□□
FBA/FBR
ー40～＋85℃
FL05□ Type
FL06BT Type
3. Rated current
LA Type
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA
: The maximum DC value having inductance within 10% and temperature incease within 40℃ (LA:20℃) by the application of DC bias.
LHL□□□ : The maximum DC value having inductance decrease within 10% (LHLC08, LHLC10：within 30%) and temperature increase within the following specified
temperature by the application of DC bias.
Reference temperature : 25℃ (LHL08, LHL10, LHL13)
: 30℃ (LHL16, LHLP□□)
: 40℃ (LHLC08, LHLC10)
FB
FL
: No disconnection or appearance abnormality by continuous current application for 30 min. Change after the application shall be within ±20% of the initial value.
This is not guaranteed for electrial characteristics during current application.
: The maximum DC value having temperature rise within specified value.
4. Impedance
LA Type
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
Refer to individual specification
FL05□ Type
FL06BT Type
【Test Method and Remarks】
FB
: Measuring equipment : Impedance analyzer (HP4191A) or its equivalent
Measuring frequency : Specified frequency
FL06BT : Measuring equipment : 4291A (HP) or its equivalent
Measuring frequency : Specified frequency
5. Inductance
LA Type
CAL45 Type
Within the specified tolerance
LHL□□□
FBA/FBR
FL05□ Type
Within the specified tolerance
FL06BT Type
【Test Method and Remarks】
LA, CA
: Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent)
Measuring frequency : Specified frequency
LHL□□□ : Measuring equipment : LCR meter (HP4285A＋HP42851A or its equivalent)
LCR meter (HP4263A) or its equivalent (at 1kHz)
Measuring frequency : Specified frequency
FL05R□ : Measuring equipment : HP4262A or its equivalent
Measuring frequency : 1kHz
6. Q
LA Type
Within the specified tolerance
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA : Measuring equipment : LCR meter (HP4285A + HP42851A or its equivalent)
Measuring frequency : Specified frequency
LHL□□□ (except LHLP) : Measuring equipment : LCR meter (HP4285A＋HP42851A or its equivalent)
LCR meter (HP4263A) or its equivalent (at 1kHz)
Measuring frequency : Specified frequency
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP1
■ RELIABILITY DATA
7. DC Resisitance
LA Type
CAL45 Type
LHL□□□
FBA/FBR
Within the specified tolerance
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA : Measuring equipment : low ohmmeter (A&D AD5812 or its equivalent)
LHL□□□・FB・FL : Measuring equipment : DC ohmmeter
8. Self resonance frequency
LA Type
Within the specified tolerance
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA : Measuring equipment : Network analyzer (Anritsu MS620J or its equivalent)
LHL□□□ (except LHLP) : Measuring equipment : (HP4191A, 4192A) its equivalent
9. Temperature characteristic
LA Type
△L/L : Within ±5%
CAL45 Type
LHL□□□
△L/L : Within ±7% (except LHLP16 : Within ±20%)
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA : Change of maximum inductance deviation in step 1 to 5
Step
Temperature (℃)
1
2
3
4
5
20
ー25 (Minimum operating temperature)
20 (Standard temperature)
＋85 (Maximum operating temperature)
20
LHL□□□ : Change of maximum inductance deviation in step 1 to 5
Temperature at step 1 : 20℃
Temperature at step 2 : Minimum operating temperature
Temperature at step 3 : 20℃ (Standard temperature)
Temperature at step 4 : Maximum operating temperature
Temperature at step 5 : 20℃
10. Tensile strength test
LA Type
CAL45 Type
No abnormality such as cut lead, or looseness.
LHL□□□
FBA/FBR
No abnormality such as cut lead, or looseness.
No abnormality such as cut lead, or looseness.
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA
: Apply the stated tensile force progressively in the direction to draw terminal.
force (N)
25
duration (s)
5
CA
: Apply the stated tensile force progressively in the direction to draw terminal.
force (N)
10
duration (s)
10
LHL□□□ : Apply the stated tensile force progressively in the direction to draw terminal.
Nominal wire diameter tensile φd (mm)
force (N)
duration (s)
0.3＜φd≦0.5
5
0.5＜φd≦0.8
0.8＜φd≦1.2
10
25
30±5
FBA/FBR : The body of a component shall be fixed and a tensile force of 20±1N shall be applied to the lead wire in the axial diretion of the component during 10±1 seconds.
FL05R□ : Fix the body of a component in the direction to draw terminal,and gradually apply the tensile force of 4.9N.
11. Over current
LA Type
No emission of smoke no firing.
CAL45 Type
There shall be no scorch or short of wire.
LHL□□□
LHLC08,LHLC10 : There shall be no firing.
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LHL□□□/LA・CAL45 Type：Measuring current
Duration
: Rated current×2
: 5 min.
Number of measuring
: one time
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP2
■ RELIABILITY DATA
12. Terminal strength : bending
LA Type
CAL45 Type
No abnormality such as cut lead, or looseness.
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA : Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the initial position. This operation
is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter tensile
Bending force
(N)
Mass reference weight
(kg)
φd (mm)
0.3＜φd≦0.5
0.5＜φd≦0.8
2.5
5
0.25
0.50
LH・FB : Suspend a weight of specified mass at the end of the terminals and incline the body through the angle of 90 degrees and return it to the initial position. This operation
is done over a period of 2-3 sec. Then second bend in the opposite direction shall be made.
Number of bends : Two times.
Nominal wire diameter tensile
Bending force
(N)
Mass reference weight
(kg)
φd (mm)
0.3＜φd≦0.5
0.5＜φd≦0.8
0.8＜φd≦1.2
2.5
5
0.25
0.5
10
1.0
13. Insulation resisitance : between the terminals and body
LA Type
CAL45 Type
LHL□□□
FBA/FBR
100MΩ min.
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LHL□□□ : Applied voltage : 500 VDC
Duration
: 60 sec.
14. Insulation resistance : between terminals and core
LA Type
CAL45 Type
LHL□□□
FBA/FBR
1MΩ min. (Other than materail code MA)
FL05□ Type
FL06BT Type
【Test Method and Remarks】
FBA・FBR : Applied voltage : 100 VDC
Duration
: 60±5 sec.
15. Withstanding : between the terminals and body
LA Type
CAL45 Type
LHL□□□
FBA/FBR
No abnormality such as insulation damage
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LHL□□□ : Accoding to JIS C5102. 7. 1. 3 (C)
Metal global method
Applied voltage : 500 VDC
Duration
: 60 sec.
16. DC bias characteristic
LA Type
△L/L : Within ー10%
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA : Measure inductance with appliation of rated current using LCR meter to compare it with the initial value.
17. Body strength
LA Type
No abnormality as damage.
CAL45 Type
LHL□□□
FBA/FBR
No abnormality such as cracks on body.
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA
: Applied force : 30N
Duration
Speed
: 10 sec.
: Shall attain to specified force in 2 sec.
CAL45 : Applied force : 50N
Duration
Speed
: 10 sec.
: Shall attain to specified force in 2 sec.
FBA
: Applied force : 50±3N
Duration : 30±1 sec.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP3
■ RELIABILITY DATA
18. Resisitance to vibration
LA Type
△L/L : Within ±5%ꢀQ : 30min
△L/L : Within ±5%
CAL45 Type
LHL□□□
Appearance : No abnomality
△L/L : Within ±5%
Q change : Within ±30% (LHLP : only △L/L)
FBA/FBR
Appearance : No abnomality
Impedance change : Within ±20%
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA
: Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
Frequency range : 10 to 55 to 10Hz (1min.)
Amplitude : 1.5mm
Mounting method : Soldering onto printed board.
Recovery : At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.
LHL□□□・FB：Directions
: 2 hrs each in X, Y and Z directions total : 6hrs.
Frequency range : 10 to 55 to 10Hz (1min.)
Amplitude
: 1.5mm (But don't exceed acceleration 196m/s2 (two power))
Mounting method : Soldering onto printed board.
19. Resistance to shock
LA Type
No significant abnormality in appearance
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA
:
Drop test
Impact material : concrete or vinyl tile
Height : 1m
Total number of drops : 10 times
20. Solderability
LA Type
At least 75％ of terminal electrode is covered by new solder.
CAL45 Type
LHL□□□
FBA/FBR
At least 75％ of terminal electrode is covered by new solder.
At least 90％ of terminal electrode is covered by new solder.
FL05□ Type
FL06BT Type
At least 75％ of terminal electrode is covered by new solder.
【Test Method and Remarks】
LA, CA
: Solder temperature : 230±5℃
Duration : 2±0.5 sec.
LHL□□□ : Solder temperature : 235±5℃
Duration
Immersion depth
: 2±0.5 sec.
: Up to 1.5mm from bottom of case.
FB
: Solder temperature : 230±5℃
Duration
: 3±1 sec.
Immersion depth
: Up to 1.5mm from terminal root.
FL05R□ : Solder temperature : 230±5℃
Duration
Immersion depth
: 2±0.5 sec.
: Up to 2 to 2.5mm from terminal root.
FL06BT
: Solder temperature : 230±5℃
Duration
: 3±1 sec.
Immersion depth
: Up to 0.5 to 1.0mm from terminal root.
21. Resisitance to soldering heat
LA Type
No significant abnormality in appearance
△L/L : Within ±5%
CAL45 Type
LHL□□□
FBA/FBR
No significant abnormality in appearance
No significant abnormality in appearance
Refer to individual specification
Inductance change : Within ±5%
Impedance change : Within ±20%
Q change : Within ±30%(LHLP : only △L/L)
FL05□ Type
FL06BT Type
No significant abnormality in appearance
Impedance change : Within ±20%
【Test Method and Remarks】
LA, CA
: Solder temperature : (CA) 270±5℃, (LA) 260±5℃
Duration
: 5±0.5 sec. One time
Immersed conditions : Inserted into substrate with t=1.6mm
Recovery
: At least 1hr of recovery under the standard condition after the test, followed by the measurement within 2hrs.
LHL□□□ : Solder bath method : Solder temperature : 260±5℃
Duration
: 10±1 sec.
Up to 1.5mm from the bottom of case.
Manual soldering
: Solder temperature : 350±10℃ (At the tip of soldering iron)
Duration
: 5±1 sec.
Up to 1.5mm from the bottom of case.
Caution
: No excessive pressing shall be applied to terminals.
Recovery
: 4 to 24hrs of recovery under the standard condition after the test.
FB
FL
: Solder bath method : Condition 1 : Solder temperature : 260±5℃
Duration
: 10±1 sec.
Immersion depth
: Up to 1.5mm from the terminal root.
Condition 2 : Solder temperature : 350±5℃
Duration
Immersion depth
: 3±1 sec.
: Up to 1.5mm from the terminal root.
Recovery
: 3hrs of recovery under the standard condition after the test.
: Solder condition
Immersion depth
Recovery
: 260±5℃
10±1 sec.
: Up to 0.5 to 1.0mm from the terminal root.
: 3hrs of recovery under the standard condition after the test.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP4
■ RELIABILITY DATA
22. Resisitance to solvent
LA Type
Please avoid the ultrasonic cleaning of this product.
No significant abnormality in appearance
CAL45 Type
LHL□□□
FBA/FBR
Impedance change : Within ±20%
FL05□ Type
FL06BT Type
【Test Method and Remarks】
FB : Solvent temperature : 20～25℃
Duration
Solvent type
Recovery
: 30±5 sec.
: Acetone
: 3hrs of recovery under the standard condition after the test.
23. Thermal shock
LA Type
△L/L : Within ±10%ꢀQ : 30min
△L/L : Within ±10%
CAL45 Type
LHL□□□
FBA/FBR
Appearance : No abnormality
Appearance : No abnormality
Refer to individual specification
Appearance : No abnormality
Inductance change : Within ±10%
Impedance change : Within ±20%
Q change : Within ±30% (LHLP：only △L/L)
FL05□ Type
FL06BT Type
Impedance change : Within ±20%
【Test Method and Remarks】
LA, CA
: Conditions for 1cycle
Step
Temperature (℃)
Duration (min.)
30±3
Within 3
30±3
＋0
ー3
1
2
3
4
ー25
Room temperature
＋2
＋85
ー0
Room temperature
Within 3
Number of cycles : 5 cycles
Recovery : At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs.
LHL□□□・FB : Accoding to JIS C0025
Conditions for 1 cycle
Step
Temperature (℃)
Minimum operating temperature
Room temperature
Duration (min.)
30±3
Within 3
30±3
＋0
ー3
1
2
3
4
＋2
ー0
Minimum operating temperature
Room temperature
Within 3
Number of cycles : 10 cycles〔LHL□□□〕
: 5 cycles (FBA, FBR)
Recovery
: 4 to 24hrs of recovery under the standard condition after the removal from the test chamber.〔LHL□□□〕
: 3hrs of recovery under the standard condition after the removal from the test chamber. (FBA, FBR)
FL
: Accoding to JIS C0025
Conditions for 1 cycle
Step
Temperature (℃)
Duration (min.)
30±3
Within 3
30±3
＋0
ー3
1
2
3
4
ー25
Room temperature
＋2
＋85
ー0
Room temperature
Within 3
Number of cycles : 10 cycles
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
24. Damp heat
LA Type
△L/L : Within ±10%ꢀQ : 30min
△L/L : Within ±10%
CAL45 Type
LHL□□□
FBA/FBR
Appearance：No abnormality
Impedance change：Within ±20%
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA : Temperature : 40±2℃
Humidity
Duration
Recovery
: 90～95%RH
: 1000 hrs
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
FB : Temperature : 60±2℃
Humidity
Duration
Recovery
: 90～95%RH
: 1000 hrs
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP5
■ RELIABILITY DATA
25. Loading under damp heat
LA Type
△L/L : Within ±10%ꢀQ : 30min
△L/L : Within ±10%
CAL45 Type
LHL□□□
FBA/FBR
Appearance : No abnormality
Imductance change : Within ±10%
Impedance change : Within ±20%
Q change : Within ±30% (LHLP : only △L/L)
FL05□ Type
FL06BT Type
Refer to individual specification
Appearance : No abnormality
【Test Method and Remarks】
LA, CA
: Temperature
Humidity
: 40±2℃
: 90～95%RH
Duration
: 1000 hrs
Applied current : Rated current
Recovery
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
LHL□□□ : Temperature
Humidity
: 40±2℃
: 90～95%RH
: 1000±24 hrs
Duration
Applied current : Rated current
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
FL
: Temperature
Humidity
Duration
: 60±3℃
: 90～95%RH
: 500 (＋12, ー0) hrs
Applied current : Rated current
Recovery
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
26. Loading at high temperature
LA Type
△L/L : Within ±10%ꢀQ : 30min
△L/L : Within ±10%
CAL45 Type
LHL□□□
FBA/FBR
FL05□ Type
FL06BT Type
【Test Method and Remarks】
LA, CA
: Temperature
Duration
: 85±2℃
: 1000 hrs
Applied current : Rated current
Recovery : At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
27. Low temperature life test
LA Type
△L/L : Within ±10%ꢀQ : 30min
△L/L : Within ±10%
CAL45 Type
LHL□□□
FBA/FBR
Appearance : No abnormality
Inductance change : Within ±10%
Impedance change : Within ±20%
Q change : Within ±30% (LHLP : only △L/L)
FL05□ Type
FL06BT Type
Refer to individual specification
Appearance : No abnormality
【Test Method and Remarks】
LA, CA
: Temperature : ー25±2℃
Duration
: 1000 hrs
: At least 1hr of recovery under the standard removal from test chamber, followed by the measurement within 2hrs.
Recovery
LHL□□□ : Temperature : ー40±3℃
Duration
Recovery
: 1000±24 hrs
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
FL
: Temperature : ー40±3℃
Duration
: 500 (＋12, ー0) hrs
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
Recovery
28. High temperature life test
LA Type
CAL45 Type
LHL□□□
FBA/FBR
Appearance : No abnormality
Inductance change : Within ±10%
Impedance change : Within ±20%
Q change : Within ±30% (LHLP : only △L/L)
FL05□ Type
FL06BT Type
Refer to individual specification
Appearance : No abnormality
【Test Method and Remarks】
LHL□□□ : Temperature : 105±3℃
Duration
Recovery
: 1000±24 hrs
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
FL
: Temperature : 85±3℃
Duration
: 500 (＋12, ー0) hrs
: 1 to 2hrs of recovery under the standard condition after the removal from the test chamber.
Recovery
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP6
■ PRECAUTIONS
CAL Type, LH Type, FB Type, FL Type, LA Type
1. Circuit Design
◆Operating environment
1.The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
Precautions
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
◆Design
Precautions
1.Please design insertion pitches as matching to that of leads of the component on PCBs.
Technical ◆Design
consider-
ations
1.When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will cause breakage of
the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.
3. Considerations for automatic placement
◆Adjustment of mounting machine
1.Excessive impact load should not be imposed on the products when mounting onto the PC boards.
Precautions
2.Mounting and soldering conditions should be checked beforehand.
Technical
consider-
ations
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
2. Do not immerse the entire inductor in the flux during the soldering operation.
◆Lead free soldering
1.When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, soldering etc
sufficiently.
Precautions
Recommended conditions for using a soldering iron:
・Put the soldering iron on the land-pattern.
・Soldering iron's temperature - Below 350℃
・Duration - 3 seconds or less
・The soldering iron should not directly touch the inductor.
◆Reflow soldering
1. As for reflow soldering, please contact our sales staff.
Technical ◆Lead free soldering
consider-
ations
1.If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
5. Cleaning
Precautions
◆Cleaning conditions
1. CAL type, LH type, LA Type
Please do not do cleaning by a supersonic wave.
Technical ◆Cleaning conditions
consider-
ations
1. CAL type, LH type, LA Type
If washing by supersonic waves, supersonic waves may deform products.
6. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
Precautions
2. LH type
If inductors are dropped onto the floor or a hard surface they should not be used.
◆Packing
1. Please do not give the inductors any excessive mechanical shocks.
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading / fragile item).
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Mechanical considerations
Technical
consider-
ations
1. There is a case to be damaged by a mechanical shock.
2. LH type
There is a case to be broken by a fall.
◆Packing
1. There is a case that a lead wire could be deformed by a fall or an excessive shock.
7. Storage conditions
◆Storage
1.To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
Recommended conditions
Precautions
・Ambient temperature 0～40℃
・Humidity
Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, inductors should be used within one year from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Technical ◆Storage
consider-
ations
1.Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
le0104fi01_reli_e-01
le0104fi01_reli-RP7
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明